belkin wifi extender setup

How to setup belkin wifi extender for full internet coverage

Dead zones are common things in the house and most especially in bigger houses. So if you are dealing with dead zones, you do not have to be worried about that as you are not the only one faced with such a situation. Here in this post, you will get to know how the belkin wifi extender setup can be done to help expand the network from your main router. The Belkin extender is quick and very easy to set up considering the fact that it is built with smart features. These features make it effortless to complete the setup process. 

A detailed instruction on how to setup belkin wifi extender​

Before you begin your setup, there are some things you must put in place first. Below is a list of the tools that you will need to get together in order to proceed with the setup. Ensure that you follow the setup instructions step by step so that you will not be faced with any kind of technical error during the process.  
  • Wireless router
  • A computer. Be sure that the browser on your computer has an updated browser. 
  • The Belkin extender 
  • The login details and Web Address or IP 
  • Ethernet cord

Step by step setup instructions for belkin wifi range extender setup

  • Firstly, plug in your Belkin extender into an electric outlet. But make sure that you position the extender very close to the main router.
  • Wait for some time and you will see the LED light on your extender turn solid green. 
  • Next, you have to open your computer and navigate the settings. Go to “Wifi” and enable it. 
  • You will find a list of available networks. From there, select the network name for your Belkin extender and connect to it.
  • Subsequently, this action will directly launch your browser and load the Belkin extender admin page. However, in cases where this does not happen, after connecting to the network. 
  • You have to manually launch the browser on your computer and type in the default IP Address or http belkin.range and press “Enter”
  • Next, carefully type in the login details of your Belkin extender network and select “Login”. You can find these details on a sticker that has been placed on your extender. 
  • Therefore, you can begin by implementing the on screen prompt instructions that are going to be appearing on the screen. 
  • Begin by selecting “Get Started”. This will cause your extender to detect all active wireless routers around .
  • Afterward, from the list available, select the network name of your wireless network. 
  • Type in the password for your main router and select “Connect” to proceed with the belkin wifi extender setup.
  • Afterward, you need to create extended network. You will have to choose the network you would prefer to extend if you are using a Dual Band. else, it will automatically bring the only network available for you to extend. 
  • Lastly, select the network and follow the remaining instructions from the Setup Wizard. 

How to login to Belkin extender

For you to access anything on your Belkin admin page, you have to login first as with other wifi extenders. And it is also good that the login process is not difficult at all. With a few steps, you will be right in your admin page. 

  • First and foremost, you have to connect your extender to the computer. You can do that wirelessly or through the ethernet cable. 
  • To use the ethernet cord, you have to place the extender and the computer in a close range. Then insert one end of the cord into the extender and the other end into the computer. 
  • To make a wireless connection. You have to open your computer and go to the “Settings” option. Under settings, select “Wifi Settings”. Under the wifi settings, you have to enable the wifi and that will search for available networks within the range/ from the list of networks found, select the network name for your extender setup. Input the extender password and select “Connect”.
  • Afterward, you can open the browser in your computer and type in http://belkin.range. Or you can use the IP address too http://192.168.206.1
  • Press “Enter” on your keyboard
  • Subsequently, that will load the login page. On the login page, carefully type in your password and username. Which can be found on the sticker on your extender. 
  • Lastly, select “Login”. 

To continue with your belkin wifi extender setup, you have to promptly follow the setup on screen instructions that will be displayed before you step by step.

How to troubleshoot your Belkin extender

Sometimes it is unavoidable to deal with technical problems that arise with our routers and range extenders. You can go ahead to try using some troubleshooting solutions to help you put an end to the issue on ground. Meanwhile, some of these problems occur even during setup. 

  • Check to confirm that all the wired connections that you have made are firm and secure. If there is any loose connection anywhere, you will have to deal with connection issues. Also ensure that these cords have been inserted into the right ports.
  • Typing in the wrong web address or IP into the browser can also be a hindrance. As well as typing the right Web Address into the wrong field will not produce the right result. 
  • When your Belkin extender is in use and begins to show signs of deteriorating network speed, it could be that the firmware is outdated. So you need to download the latest version for your extender model. Then log into your admin account and upload it. 
  • Another troubleshooting tip is that you can check your browser to know if it is updated. If it is, try checking the cache data, junk file, or history. If these options are full, try to empty them. 
  • You can also try power cycling. Turning off your extender, wait for a while, and turn it back on

Lastly, you can use the reset button to reset your extender and setup belkin wifi extender again.