How do I set up my Belkin N600 WiFi router?

The Belkin N600 DB WiFi router gives seamless speed for video streaming and online gaming. It is a modern router that possesses a powerful signal strength that delivers a better network anywhere in your home. The Belkin N600 login makes the installation process easy and uncomplicated. The phone computer/laptop will help to setup the Belkin N600 router. The wireless dual-band technology makes it easy for the router to transmit and receive data using both frequencies. Further, the Belkin Range extender helps in extending the wireless range of the router. This blog will guide you to set up and log in to Belkin router n600.

Belkin N600

Steps to set up N600 DB wireless router

  • Power off the modem by disconnecting the power supply. The modems having battery backup will have to be disconnected too.
  • Using the ethernet cable connect the modem and the router.
  • Power on your modem. If the modem works with the battery backup, it can be reconnected now. You might have to hold the rest button for 10 seconds at least.
  • You can power on the router now by inducing the power supply.

Steps to connect to the router

  • Locate the network ID card on the router. The default network name and password are printed on the model as well.
  • You have an option to choose among the computer, tablet or phone to connect to the wireless network shown on the network ID card.
  • The router should detect the network and restart it.
  • In case, if the router fails to establish an internet connection on its own, restarting the modem could be a viable option or input a username or password if there is a requirement.
  • Follow the on-screen instructions given.
  • If there is a requirement for the firmware update, the router will demand one.
  • On the following screen, you will be asked to customise the network name and password. In case you wish to change the credentials, then make changes and click on Save and continue. Take notes of the changes made and register your router if in future any technical support is required.
  • Once you are done with the installation, it will lead you to the dashboard.

Belkin router setup using cable internet service

Belkin-Router-Setup

Using the web-based browser setup it is easy to configure the Belkin router to connect to the cable interment service. Ensure the following things first.

  • Verify that the internet connection is stable.
  • Now attach the devices together.
  • Go to the web-based setup page and configure the Belkin router for a cable internet connection.

Steps to access the setup page and connect to your ISP

  • Using an ethernet cable, connect the computer to the modem.
  • Check if the internet connection on the computer is stable.

Connect the devices

Before connecting the modem and the router, make sure the modem and router are unplugged from the power source.

  • The internet port of the router and the cable modem needs to be connected.
  • Plugin your modem and then the router to the power source.
  • Connect the computer to the router’s ethernet port. If you are using a laptop/tablet, you can connect to the router network using the ‘Network and sharing centre’/wifi settings, respectively.

Steps to access the web-based setup page

  • Open the web browser and enter the default IP address in the address bar.
  • Once you see the router setup utility, click on the login icon.
  • Leave the password area empty.

Configuring router for the cable internet connection

After the web-based setup page has been accessed now you are ready to configure the Belkin router to connect to the cable internet connection.

  • Click on the ‘connection type’ option under the internet WAN.
  • Now, select your Connection type. For cable ISP’s, choose dynamic.
  • Click on the next option.
  • Enter the hostname in the field, then click on the apply changes and follow the further on-screen instructions.
Configuring router for the cable internet connection

Why is my Belkin N600 router so slow?

You might have come across the slow internet speed on your iPhone or iPad connected to the Belkin N600 router. The possible scenario is to set the WMM QoS settings for the 2.4 GHz band to off while fixing the error. Try following some given steps for the same.

  • On any prefered web browser input the default IP address and access the web-based setup page of the router.
  • After landing on the page, you can log in and hence, you will be able to configure the settings and change them accordingly.
  • Click on submit option after filling the password.
  • Now, select the ‘wireless tab’ on the left column.
  • Click the channel and SSID link on the wireless page.
  • Set the 802.11e/WMM QoS>to OFF.
  • Save the changes made.

How to Reset Belkin N600 router?

When the router starts giving errors in its working which are irrecoverable, the reset option is the possible solution then. Follow the guide below to perform a reset.

  • Find the reset button on your router.
  • While the router is powered on, press and release the reset button. The lights will flash and start blinking.
  • Wait until the light becomes solid again to restore the process.

Conclusion

The Belkin N600 DB wireless router setup is extremely important to access the rest of its settings like login, configuration, firmware. We hope this blog was helping. But, if you still face any queries, feel free to get in touch with our expert team now and get your doubts cleared.